System configuration using ACLI
file-server
poe-conservation
<portList>
Disabling Avaya TLV transmit flags using ACLI
Use this procedure to disable the transmission of optional proprietary Avaya TLVs from switch
ports to Avaya IP phones.
The switch transmits configured Avaya TLVs only on ports with the TLV transmit flag
enabled.
Prerequisites
Log on to the Interface Configuration mode in ACLI.
Procedure steps
Disable Avaya TLVs that the switch transmits by using the following command:
no lldp tx-tlv [port <portList>] vendor-specific avaya {[poe-
conservation] [call-server] [file-server] [dot1q-framing]}
Variable definitions
call-server
dot1q-framing
file-server
poe-conservation
<portList>
Viewing the Avaya TLV transmit flag status using ACLI
Use this procedure to display the status of transmit flags for switch ports on which Avaya IP
phone support TLVs are configured.
190
Configuration — System
Variable
Variable
Value
Enables the file server TLV transmit flag.
Enables the PoE conservation request TLV
transmit flag.
Specifies a port or list of ports.
Value
Disables the call server TLV transmit flag.
Disables the Layer 2 priority tagging TLV transmit
flag.
Disables the file server TLV transmit flag.
Disables the PoE conservation request TLV
transmit flag.
Specifies a port or list of ports.
April 2011