Configuring The Ipv4 Remote Access List Using Edm - Avaya 3500 series Configuration Manual

RMON using Enterprise Device Manager
Name
128 to 255
256 to 511
512 to 1023
1024 to 1518
OversizePkts (>1518)

Configuring the IPv4 remote access list using EDM

Use this procedure to configure a list of IPv4 source addresses for which to permit remote
access to a switch.
Procedure
1. From the navigation tree, double-click Administration.
2. In the Administration tree, click Remote Access.
3. In the Remote Access work area, click the Allowed List(IPv4) tab.
4. In the Allowed List (IPv4) section, configure as required.
5. On the toolbar, click Apply.
82 Configuration — System Monitoring
Description
Displays the total number of packets
(including bad packets) received that are
greater than 127 octets in length (excluding
framing bits but including FCS octets).
Displays the total number of packets
(including bad packets) received that are
greater than 255 octets in length (excluding
framing bits but including FCS octets).
Displays the total number of packets
(including bad packets) received that are
greater than 511 octets in length (excluding
framing bits but including FCS octets).
Displays the total number of packets
(including bad packets) received that are
greater than 1023 octets in length (excluding
framing bits but including FCS octets).
Displays the total number of packets
received that are longer than 1518 octets
(excluding framing bits but including FCS
octets) and were otherwise well formed.
Comments? infodev@avaya.com
March 2013