Default User Name And Password; Edm Window - Avaya 3500 Quick Start Configuration

secure-only option is enabled by default and allows HTTPS access to the device. Take the
appropriate security precautions within the network if you use HTTP.
If you experience issues while connecting to EDM, check the proxy settings. Proxy settings can
affect EDM connectivity to the switch. Clear the browser cache, and do not use a proxy when
connecting to the device.

Default user name and password

The following table contains the default user name and password that you can use to log on to the
switch using EDM. For more information about changing the passwords, see Configuring Security
on Avaya Ethernet Routing Switch 3500 Series, NN47203-504.

EDM window

The EDM window contains the following parts:
1. navigation tree—the navigation pane on the left side of the window that displays available
command folders in a tree format
2. menu bar—the area at the top of the window that displays primary and secondary tabs that
you accessed during the session; the tabs remain available until you close them
3. toolbar—the area just below the menu bar that provides quick access to the most common
operational commands such as Apply, Refresh, and Help
4. work area—the main area on the right side of the window that displays the dialog boxes
where you view or configure switch parameters
Note:
Depending on your hardware model, information displayed may appear different than the figure
shown in this section.
September 2016 Quick Start Configuration
Comments on this document? infodev@avaya.com
Enterprise Device Manager
11