Chapter 4: Global Troubleshooting Tasks; Using Debug Commands; Logging Into The Router; Viewing Debug Commands Through Telnet - Avaya 2330/4134 Troubleshooting Manual

Chapter 4: Global troubleshooting tasks

Using debug commands

Debug commands are used to troubleshoot various features of the Avaya Secure Router
2330/4134. While this book contains some common debug commands, you should refer to the
Avaya Secure Router 2330/4134 — Command Line Reference (NN47263-507) for a complete
listing and usage instructions.

Logging into the router

This procedure describes the steps necessary to log on to the Secure Router 2330/4134.
Procedure steps
To log on to the Secure Router 2330/4134, enter the username and password:
login: admin
password: setup

Viewing debug commands through telnet

This procedure describes the steps necessary to enable terminal monitor. Terminal monitor
must be enabled to view debug commands when using telnet.
Procedure steps
1. Log on to the Secure Router 2330/4134 using telnet.
2. From the prompt, enter
3. Enter
Troubleshooting
SR# configure terminal
SR/ configure# terminal monitor
Debug commands will now be displayed through the telnet connection.
August 2013 19