Viewing Poe Information - Avaya 2330 Manual

Procedure steps
1. To access configuration mode, enter:
2. To configure the PoE port power limit, enter:
Table 8: Variable definitions
<power limit>
<slot/port>

Viewing PoE information

Use the procedure in this section to view information related to PoE configuration.
Procedure steps
1. To view information about the priority and power limit configured for the port, enter:
Configuration — Layer 2 Ethernet
configure terminal
poe portpowerlimit <slot/port> <power limit>
Variable Value
Specifies the power limit for a port that is in
static mode. Valid values for the power limit
are 37 to 16000 milliwatts (mW). The default
value is 16000 mW (that is, 16 W).
Use no poe portpowerlimit
<slot/port> <power limit>
the power limit to the default value (16000
mW).
Important:
The power limit is set with an accuracy of
100mW. For example, if the power limit is
set to any value in the range 37 to 99, the
power limit is set to 0. If the power limit is
set to any value in the range 100 to 199,
the power limit is set to 100 mW. If the
power limit is set to any value in the range
15900 to 15999, the power limit is set to
15900 mW.
Specifies the slot and port number that
identify the port to configure. Valid values for
slot are 5 to 7. Valid values for port are 1 to
24.
Viewing PoE information
reset
July 2013 49