Viewing Switch Information Using Edm - Avaya 3500 Series Getting Started

Name
IP Route to Gateway Modem-Router
IP Office Call-Server
IP Office File-Server
Status

Viewing switch information using EDM

Use this procedure to display switch specific information such as the type of switch, hardware
version number, serial number, the number of base ports, and the total number of ports.
Procedure
1. From the Device Physical View, click a switch.
2. From the navigation tree, click Edit.
3. In the Edit tree, click Unit.
Unit field descriptions
The following table describes the fields on the Unit tab.
Name
Type
Descr
Ver
SerNum
BaseNumPorts
TotalNumPorts
July 2015
Description
Specifies the IP Route to gateway modem and
router. By default, the IP address is 192.168.44.2
Specifies the IP Office call server IP address. By
default, the call server IP address is 192.168.42.1
Specifies the IP Office file server IP address. By
default, the file server IP address is 192.168.42.1
Displays the status of the last action that occurred
since the switch last booted. Values include:
• other—no action occurred since the last boot.
• inProgress—the selected operation is in progress.
• passed—the selected operation succeeded.
• failed—the selected operation failed.
Description
Specifies the type of switch.
Description of switch.
Specifies the hardware revision number of the
switch.
Specifies the serial number of the switch.
Specifies the base number of ports.
Specifies the total number of ports.
Comments on this document? infodev@avaya.com
Configuring the switch using EDM
Getting Started with Avaya ERS 3500 Series
121