Procedure
1. In the navigation tree, double-click Edit.
2. In the Edit tree, double-click Chassis.
3. In the Chassis tree, click Chassis.
4. In the work area, click the Asset ID tab.
5. In the table, click the cell under the Asset ID column heading.
6. In the Asset ID field, enter an alphanumeric value, up to 32 characters.
7. On the toolbar, click Apply.
Selecting the ACLI banner type using EDM
Use this procedure to select the type of banner that is displayed in the Avaya Command Line (ACLI)
Telnet screen.
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click Chassis.
3. In the Chassis tree, click Chassis.
4. In the work area, select the Banner tab.
Banner tab field descriptions
The following table describes the fields on the Banner tab.
Name
BannerControl
Customizing ACLI banner using EDM
Use this procedure to customize the banner that is displayed in the Avaya Command Line (ACLI)
Telnet screen. A customer banner is 19 lines high and can be up to 80 characters long.
Before you begin
Select custom for the ACLI banner type.
July 2015
Description
Specifies the banner to be displayed when you
connect to an Avaya Ethernet Routing Switch 3500
Series device using Telnet. Values include:
• static: uses a predefined static banner.
• custom: uses a custom banner.
• disabled : prevents the display of any banner.
Comments on this document? infodev@avaya.com
Configuring the switch using EDM
Getting Started with Avaya ERS 3500 Series
127