General: Device Commands; Banner Login; Banner Post-Login - Avaya X330WAN User Manual

Table 6.1
• Interface Serial
is the number of the device in a stack of WAN devices,
N
WAN port (1 or 2),
group.

General: Device Commands

This section contains a list of all general device CLI commands.

banner login

Use the
banner login
The form of this command sets the login banner to the default.
no
Note: Before creating a new banner, delete the current banner using the
command.
login
Syntax
[no] banner login
Example
X330WAN-2USP-1(super)# banner login

banner post-login

Use the
banner post-login
mode. The
Note: Before creating a new banner, delete the current banner using the
post-login
Syntax
[no] banner post-login
Example
X330WAN-2DS1-1(super)# banner post-login
Avaya X330WAN User's Guide
X330WAN-2DS1 CLI Prompts (Continued)
X330WAN-2DS1-N(config-
if:Serialn:x)#
is the interface number, and
Z
command to enter the
command to enter the
form of this command sets the post-login banner to the default.
no
command.
General: Device Commands
X330WAN-2USP-N(config-
if:Serialn)#
is the number of the
n
is the number of the channel
x
configuration mode.
login banner
configuration
post-login
no banner
no banner
89