Chapter 3 Configuring Your Library - Quantum scalar i500 User Manual

F
Scalar i500 User's Guide
Configuring Your Library
3
Once you have installed the hardware as described in the Scalar i500
Getting Started Guide, you are ready to configure your library's settings. A
Setup Wizard helps you get started configuring your library, and menu
commands on both the operator panel and the Web client allow you to
reconfigure your library at any time.
Caution: Always save the library configuration after modifying
configurable items. This will allow you to restore the most
current settings if necessary. See
Library Configuration
This chapter covers:
• About the Setup Wizard
• Using the Setup Wizard
• Accessing the Web Client
• Managing the Network
• Working With Partitions
• Configuring Cleaning Slots
• Configuring I/E Station Slots
• Setting Tape Drive Parameters
• Working With Control Paths
Saving and Restoring the
on page 494.
Chapter 3
52