Figure 65 Ethernet Expansion
Blade
Latch hooks,
open
Scalar i500 User's Guide
Tape Drive Ethernet Connectivity and the Ethernet Expansion Blade
Status LEDs
9 Carefully align the Ethernet Expansion blade with the guide slots in
the bay.
Forcing the blade into the bay can cause the pins
Caution:
to bend.
10 Evenly apply pressure to both sides of the blade and slide it into the
expansion module until the latch hooks begin to move toward the
middle of the blade. Push the latch hooks toward the middle of the
blade and into the locked position. You will feel the blade pins
connect with the expansion module's backplane as the blade locks
into place.
Chapter 12 Installing, Removing, and Replacing
471