Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

If the studs do not reach the mounting holes, pull the front of the
f
shelf toward you to extend it to the necessary length. Hold the
base of the shelf with one hand, and pull the extensible part of the
shelf with your other hand.
Extending the shelves can be difficult, but they are
Note:
designed to be resized by hand. Do not use tools to
resize the shelves, and never take them apart.
g Insert the shelf's front studs into the rack's front mounting holes.
Fasten a thumbnut to the end of each stud. Secure the rack
h
tightly, so that the ferrule fits snugly within the hole in the rack.
4 Visually make sure that both shelves are level, and that they are
aligned properly within the rack.
5 Make sure that all thumbnuts are fastened tightly. Some thumbnuts
may have loosened during installation.
Chapter 12 Installing, Removing, and Replacing
Installing the Library in a Rack
431