Menu Trees - Quantum scalar i500 User Manual

Menu Trees

Scalar i500 User's Guide
The following menus organize operations and commands into logical
groupings:
• The menu consists of commands that administrators can use to
Setup
set up and configure various aspects of the library, including
partitions, I/E station slots, cleaning slots, control paths, network
settings, drive settings, users, notifications, date and time, licenses,
FC I/O blades, library registration, and e-mail.
• The menu consists of commands that enable users to
Operations
change the library's mode of operations, import and export
cartridges, load and unload tape drives, move media, perform
diagnostics, and log off. Administrators can also access commands to
lock or unlock the I/E station and to shut the library down.
• The menu consists of commands that you can use to maintain
Tools
your library, such as viewing RAS Tickets, generating diagnostic
logs, identifying drives, configuring the internal network, saving and
restoring the library configuration, setting system and security
settings, and updating firmware.
• The menu (Web client only) consists of summaries of library
Reports
information.
A hidden menu is available to service users with the appropriate
Service
login information.
The menus vary somewhat between the Web client and operator panel
user interfaces. Administrators have access to all menu commands; users
with user privileges have more limited access.
Table 1 lists the Web client menus. Some menu commands are available
only to administrators.
I/O blade menu items are available for libraries that contain I/O blades.
Chapter 2 Understanding the User Interface
Menu Trees
45