Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

The Media Integrity Analysis report collects the following information for
each TapeAlert:
• Date and time (UTC) of TapeAlert occurrences
• Tape drive physical serial number
• Cartridge barcode
• TapeAlert value
• Occurrence count of each TapeAlert
• Tape drive error codes for each TapeAlert
To configure the report, specify the following:
• — Specifies the range of time covered in the report.
Date Range
Choose one of the following:
• Last 7 days
• Last 4 weeks (default)
• Last 3 months
• All History (as far back as there is data in the log file)
• —Specifies which values are included in the report, and how
Attribute
they are combined. Select in any combination, including all (default).
If you select no attributes, the report uses Cartridge Barcode.
• Cartridge Barcode — All relevant tape cartridges.
• Drive Physical SN — All relevant tape drives.
• TapeAlert — All TapeAlert flags that were issued. For a
description of all TapeAlert flags, see
Flag Descriptions.
• — Specifies how the data is displayed in the chart. Choose
Chart
Area, Bar (default), Line, or Pie.
• — Specifies the chart type. Select one of the following:
Type
• Rollup (default) — Displays the number of TapeAlerts for the
combination of Grouping and Attributes you selected (default).
• Trend — Shows the occurrence of TapeAlerts over time.
Chapter 4 Advanced Reporting
Working With Advanced Reporting Reports
Appendix B, TapeAlert
139