Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

physical SN, logical SN, World Wide Node Name (WWNN), World
Wide Port Name (WWPN), loop ID, topology request, speed request,
actual topology, actual speed, maximum speed, active port (if the
drive has more than one FC port), SNW licenses (displays which
Storage Networking features the tape drive is using, if any; see
Chapter 6, Storage
firmware level, control path status, and encryption method of each
tape drive.
The library configuration report lists the native device
Note:
identifier as reported by the tape drive. HP tape drives
always report SCSI as the native device identifier, even if
they are Fibre Channel or SAS. For example, if you have
HP L TO-4 Fibre Channel or SAS drives, they will be listed
in the report as HP LTO-4 SCSI drives.
• —Type, assigned partition name (storage and import/export
Slots
[I/E] station slots only), location coordinates, barcode (storage and
I/E station slots only), media type, element address, encryption
method, get count, get retries, put count, and put retries. If the slot is
a cleaning slot, the cleaning status (usable/expired) and cleaning
count (the number of times the cartridge was used to clean a tape
drive) are also displayed. For more details about slot data, see
Viewing the All Slots Report
• — Name, online status, emulation type, barcode policy,
Partitions
number of total tape drives in the partition, number of active tape
drives partition, total media, mounted media, total slots, full slots,
total I/E stations, full I/E stations, and encryption method of each
partition.
•
Modules (Chassis)
each module.
You can print the report by clicking on the printer icon in the report
window.
The path to open the report from the Web client is
.
Configuration
Chapter 10 Getting Information – Logs and Reports
Viewing the Library Configuration Report
Networking), SCSI ID, SAS address, tape drive
on page 276.
— Manufacturer, model type, and serial number of
Reports > Library
274