Manual Cartridge Assignment; Disable Remote Service User; Enable Ssl - Quantum scalar i500 User Manual

Manual Cartridge
Assignment
Disable Remote Service
User

Enable SSL

Scalar i500 User's Guide
Administrators can disable or enable manual cartridge assignment. When
3
manual cartridge assignment is enabled (the default setting), the
screen automatically appears on the operator panel once cartridges are
I/E
placed into the I/E station. The
the operator panel to assign the cartridges to a specific partition or to the
System partition. The cartridges can then be used only by the assigned
partition.
For more information on manual cartridge assignment, see
Disabling/Enabling Manual Cartridge Assignment
The path to open the appropriate screen is as follows:
• From the operator panel, select
For security purposes, prevents a service user from logging in to the
3
library remotely, from either the Web client or over the Ethernet service
port. The service user will still be able to log in to the library from the
operator panel interface. This option is disabled by default.
The path to open the appropriate screen is as follows:
• From the operator panel, select
Enables Secure Socket Layer (SSL) for secure data transmission between
3
the library and remote clients. This option is disabled by default.
The path to open the appropriate screen is as follows:
• From the operator panel, select
Chapter 3 Configuring Your Library
Configuring System Settings
screen prompts the user to use
Assign I/E
on page 77.
Setup > System Settings
Setup > System Settings
Setup > System Settings
Assign
.
.
.
128