Quantum scalar i500 User Manual page 24

Notational Conventions
Scalar i500 User's Guide
• Chapter 10, Getting Information – Logs and
use the library's built-in reports to get information you need.
• Chapter 11, Updating Library and Tape Drive
how to update library and tape drive firmware.
• Chapter 12, Installing, Removing, and
instructions on how to install, remove, and replace hardware
components in the library, including modules, tape drives, power
supplies, and cables.
• Chapter 13, Troubleshooting, describes the library's diagnostic
reporting system (RAS tickets) and how to use it. It also describes a
number of diagnostic tests you can run to troubleshoot problems.
• Chapter 14, Working With Cartridges and
cartridge handling guidelines.
• Appendix A, Library
• Appendix B, TapeAlert Flag
TapeAlerts you may see listed in RAS tickets and reports on your
library.
This document concludes with a glossary.
This manual uses the following conventions:
Note emphasizes important information related to the main
Note:
topic.
Caution indicates potential hazards to equipment or data.
Caution:
Warning indicates potential hazards to personal safety.
Warning:
This manual uses the following:
• Right side — Refers to the right side as you face the component being
described.
• Left side — Refers to the left side as you face the component being
described.
Replacing, provides
Specifications, lists the library's specifications.
Descriptions, describes of all the
Reports, explains how to
Firmware, explains
Barcodes, provides
5