Figure 20 Forcing Control Path
Failover
Scalar i500 User's Guide
Column
Active Connected
Standby Drive
Standby Status
Standby Connected
3 Select the partition on which you want to force the failover.
Note:
The standby tape drive must be "ready" and "connected"
in order to force a failover.
4 Click
.
Apply
The new active tape drive location displays in the
column. The new standby tape drive location displays in the
column.
Drive
Chapter 6 Storage Networking
Configuring Control Path Failover
Indicates
Whether the current control path tape drive
is connected and has a working link.
Location of the standby tape drive.
Ready status of the standby tape drive.
Whether the standby tape drive is connected
and has a working link.
Active Drive
Standby
155