Quantum scalar i500 User Manual page 429

Scalar i500 User's Guide
Removing and Replacing the Library Control Blade and LCB Compact Flash Card
5 If the new LCB and compact flash card came in discrete packages,
insert the new compact flash card into the new LCB (or, if replacing
the compact flash card only, remove the existing compact flash card
and install the new one in the existing LCB).
6 Insert the new LCB into the vacant LCB slot on the back of the library.
When inserting the new LCB into the slot, be sure that the LCB LEDs
are located at the top of the blade, and that the latch hooks are on the
right side of the blade.
When sliding the new LCB into the slot, there should be no
resistance.
Chapter 12 Installing, Removing, and Replacing
1 LCB compact flash card
410