Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

13 Remove all power supplies from each module that you intend to
remove. For details, see
Supplies on page 420.
14 Remove all tape drives from each module that you intend to remove.
If you are going to replace the module, label the drives with their
locations so you can re-install them in the same locations later. For
details, see Adding, Removing, and Replacing Tape Drives
page 444.
Chapter 12 Installing, Removing, and Replacing
Preparing to Remove or Replace a Module
1 Parking tab in "parked" position
Adding, Removing, and Replacing Power
on
369