Quantum scalar i500 User Manual page 561

No. Flag
24 Retension
requested
25 Multi-port
interface error
on a primary
port
26 Cooling fan
failure
27 Power supply
failure
28 Power
consumption
29 Drive
preventive
maintenance
required
30 Hardware A
Scalar i500 User's Guide
Recommended Application Client
Severity Message
W The tape drive has requested a retension
operation.
W A redundant interface port on the tape
drive has failed.
W A tape drive cooling fan has failed.
W A redundant power supply has failed
inside the tape drive enclosure. Check
the enclosure user's manual for
instructions on replacing the failed
power supply.
W The tape drive power consumption is
outside the specified range.
W Preventive maintenance of the tape
drive is required. Check the tape drive
user's manual for device-specific
preventive maintenance tasks or call the
tape drive supplier help line.
C The tape drive has a hardware fault:
1. Eject the tape or magazine.
2. Reset the drive.
3. Restart the operation.
Probable Cause
The drive is having
severe trouble
reading or writing,
which will be
resolved by a
retension cycle.
Failure of one
interface port in a
dual-port
configuration (for
example, Fibre
Channel).
Fan failure inside
tape drive
mechanism or tape
drive enclosure.
Redundant power
supply unit failure
inside the tape drive
enclosure or rack
subsystem.
Power consumption
of the tape drive is
outside specified
range.
The drive requires
preventative
maintenance (not
cleaning).
The drive has a
hardware fault that
requires reset to
recover.
542