Viewing And E-Mailing The Command History Logs - Quantum scalar i500 User Manual

Viewing and E-Mailing the Command History Logs

Scalar i500 User's Guide
The paths to open the appropriate screens are as follows:
• From the Web client, select
.
Control
• From the operator panel, select
Control > Reset Port
When FC I/O blades are installed, administrators can use the
screens to view the most recent command and response
History Log
activity that has occurred with externally addressable library devices,
controller LUNs, partitions, and tape drives. This information can help
you isolate the source of an issue, such as a library device or host
application.
You can select any configured FC I/O blade in the library and display a
list of associated library devices. For each device, you can view the
command history log. You can also choose to e-mail the command history
to a specific e-mail address. The log is sent as a text file attached to an e-
mail message.
Before you can e-mail the command history log, the library e-mail
account must be configured. For information on setting up the e-mail
account, see Configuring the Library E-mail Account
Configuring Your Library.
You cannot view command history logs from the Web client. The path to
open the appropriate screen is as follows:
• From the operator panel, select
Viewing and E-Mailing the Command History Logs
Setup > FC I/O Blades > FC I/O Blade
Setup > FC I/O Blades > FC I/O Blade
.
Tools > Command History Log
Chapter 13 Troubleshooting
Command
on page 92 in
.
505