Removing The 9U Expansion Module - Quantum scalar i500 User Manual

Removing the 9U
Expansion Module
Scalar i500 User's Guide
1 Before removing the module, follow the instructions in
12
Remove or Replace a Module
2 Starting with the topmost module of your library, open the I/E
station and access doors of each module.
Caution:
3 Disengage the Y-rails so the modules can be unstacked safely.
Chapter 12 Installing, Removing, and Replacing
on page 362.
Before unstacking the modules, the robot assembly
must be parked as described in
or Replace a Module
Replacing an Expansion Module
Preparing to
Preparing to Remove
on page 362.
396