Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

4 Carefully align the FC I/O blade with the guide slots in the bay. The
status LEDs must be at the bottom.
Caution: Forcing the blade into the bay can cause the pins to
bend.
5 Evenly apply pressure to both sides of the blade and slide it into the
expansion module until the latch hooks begin to move toward the
middle of the blade. Push the latch hooks toward the middle of the
Chapter 12 Installing, Removing, and Replacing
Adding, Removing, and Replacing FC I/O Blades
1 FC I/O blade
2 LEDs
3 Latch hooks, open
455