Figure 58 Library Configuration Example 2 - Quantum scalar i500 User Manual

Figure 58 Library Configuration
Example 2
Scalar i500 User's Guide
8 If a partition references tape drives within the module you are
removing or replacing, modify any affected partition by removing
the referenced drive elements from the partition. See
Partitions on page 73.
in Figure Figure 57
For example,
drives in the expansion modules. In
Library_c was deleted, as well as its drive references in the expansion
Chapter 12 Installing, Removing, and Replacing
Preparing to Remove or Replace a Module
on page 364, all partitions reference
Figure Figure 58
Modifying
on page 367,
367