Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

Caution: Support the robot assembly by holding onto the broad
metal X-axis plate. Lifting the robot by the thin metal
rod will bend the rod. Lifting the robot by the black
plastic picker body can damage the robot.
c After raising the robot assembly to the approximate middle of the
control module, hold it in place with one hand and, using your
other hand, move the parking tab in a counter-clockwise
direction until it stops in the "parked" position. The metal
parking tab is located at the bottom of column 1.
d Gently lower the robot assembly to rest on the parking tab.
Chapter 12 Installing, Removing, and Replacing
Installing a New Multi-Module Library Configuration
332