Scalar I500 User's Guide - Quantum scalar i500 User Manual

Option
Stop
Pause
Resume
Details
Delete

Scalar i500 User's Guide

• All — All test sessions that were run on the library. The storage limit
is one scan per media. When the limit is reached, old scan results are
deleted as new scan results are added.
4 To work with a session, select a test session row and then click your
desired option:
Description
Stops a currently running test session. Once stopped, you cannot restart the
test session. Any test results collected so far are listed. Tapes that did not
complete testing as a result of being stopped show a test result of Untested.
Pauses a currently running test session. If a tape is currently being scanned, the
scan will finish and the tape will be ejected and moved back to its original
location. Tapes in the test session that have not been tested yet will remain
queued.
Resumes a paused test session. Queued tapes are mounted and scanned.
Displays the test report for the selected test session in a new window. See
Viewing EDLM Session Report Details
Deletes the selected test session from the list. Once deleted, you cannot retrieve
the information again.
Viewing EDLM Session Report Details
To view details about a specific EDLM test session, do the following:
1 Go to the EDLM Test Results screen (Tools > EDLM > Test Results).
2 Select a row and then click the Details button.
Chapter 8 Extended Data Lifecycle Management
on page 233.
Incomplete EDLM Scans
233
8