Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

blade and into the locked position. You will feel the blade pins
connect with the expansion module's backplane as the blade locks
into place.
Note: The LEDs for the FC I/O blade are on the bottom of the
blade when the blade is correctly installed in the expansion
module.
6 Remove the necessary number of the black rubber protective covers
from the ports on the FC I/O blades when you are ready to cable the
blade.
Chapter 12 Installing, Removing, and Replacing
Adding, Removing, and Replacing FC I/O Blades
456