Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

Permanently Removing Expansion Modules From an Existing Library
6 Close the library's I/E station and access doors.
7 Connect all power cords, network data cables, and module-to-
module cables. Make sure the module terminators are installed at the
top and bottom of the stack of modules. For cabling instructions, see
Cabling the Library
8 Power on the library.
9 Re-create and/or modify partitions, cleaning slots, and I/E station
slots as desired.
Chapter 12 Installing, Removing, and Replacing
1 Parking tab in "unparked" position
on page 293.
381