Scalar i500 User's Guide
• Time and date of mount (UTC)
• Time and date of dismount (UTC)
• Media motion time (in seconds)
• Tape cartridge barcode
To configure the report, specify the following:
•
— Specifies the range of time covered in the report.
Date Range
Choose one of the following:
•
Last 7 days
•
Last 4 weeks (default)
•
Last 3 months
•
All History (as far back as there is data in the log file)
•
— Specifies which values are included in the report. Select
Attribute
one of the following:
•
Data Written/Read (default) — The amount of data written to
and read from each tape drive, shown separately in the chart.
•
Total Read and Write — The combined total amount of data
written to and read from each tape drive.
•
Media Mount Count — The number of tape cartridge mounts.
•
Media Mount Time — The total amount of time media spent in
the selected drive(s).
•
Media Motion Time — The total amount of time media spent in
motion while in the tape drive (writing, reading, rewinding, etc.).
•
— How the data is displayed in the chart. Select Area, Bar
Chart
(default), Line, or Pie.
•
— The chart type. Select one of the following:
Type
•
Rollup (default) — Displays the Grouping on the x-axis and the
Attribute amount on the y-axis.
•
Trend — Shows how the Attribute amount changes over time for
the selected Grouping.
Chapter 4 Advanced Reporting
Working With Advanced Reporting Reports
137