Preparing The Library For Moving Or Shipping - Quantum scalar i500 User Manual

Preparing the Library for Moving or Shipping

Scalar i500 User's Guide
Before you move or ship your library, follow these steps:
Caution:
When moving the library:
packaging, whether original or purchased, is required for
complete or partial de-installations. You must install the
orange robot restraint assembly to protect the robot
against damage. Use the original shipping carton and
packaging materials to further protect your library
equipment during transport.Not using the required
packaging will potentially void the support contract. Any
damage to equipment will require re-certification, or for
Quantum to repair any damage to the equipment, or both.
Quantum offers de-installation services. Please contact
your Quantum Authorized Reseller or local Quantum
Representative for further details.
Caution:
When shipping the library:
packaging materials, and the orange robot restraint
assembly that originally came with the library. This will
help protect your library against damage.
1 Save the library configuration (see
on page 495).
2 Shut down the library using the local operator panel (
System Shutdown
on the floor of the library.
3 Follow instructions on the operator panel screen.
4 Turn off library power by pressing the power button on the front
panel.
5 Turn off the power to each power supply on the back of the library.
6 Install the orange robot restraint assembly that secures the robot to
the floor of the library. The robot restraint assembly was part of the
packaging that originally came with the library.
7 Remove all cords and cables from the rear of the library.
Chapter 12 Installing, Removing, and Replacing
Preparing the Library for Moving or Shipping
Manufacturer-supplied
Use the shipping carton,
Saving the Library Configuration
). This lowers the robot to the "shipping" position
Operations >
484