Retrieving Tape Drive Sled Logs; Identifying Fc I/O Blades - Quantum scalar i500 User Manual

Retrieving Tape Drive Sled Logs

Identifying FC I/O Blades

Scalar i500 User's Guide
Administrators can retrieve tape drive sled logs. Tape drive sled log
information can be used to help troubleshoot library, tape drive sled, and
tape drive issues. You can use the
the appropriate tape drive sled.
Note: Bold column headings in the table can be sorted. For example,
selecting the
coordinates.
Details on retrieving tape drive sled log files include:
• Tape drive sled logs adhere to the following naming convention:
, where
UDS_ID_SN.LOG
location within the library and
number.
• You can select the interface type (SCSI, SAS, or FC) of the tape drive
sled from which you want to retrieve logs.
• A dialog allows you to specify where you want to save the tape
Save
drive sled log files file.
For detailed, step-by-step instructions, see your library's online Help. To
access the online Help system, click the
Web client or operator panel user interface.
You cannot retrieve tape drive sled logs from the operator panel. The
path to open the appropriate screen is as follows:
• From the Web client, select
Administrators can flash the green LED on a selected FC I/O blade to
identify the physical location of the I/O blade in the library. After
performing this blade operation, go to the back of the library and identify
Retrieve Drive Sled Log
column heading will sort by location
Location
identifies the tape drive sled coordinate
ID
identifies the tape drive sled serial
SN
Help
Tools > Drive Operations
Chapter 13 Troubleshooting
Retrieving Tape Drive Sled Logs
screen to select
icon at the top right of the
.
502