Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

Note: The Select Emulation Type and Select Media Barcode
Format fields are not selectable when creating EDLM
library managed partitions.
6 Select the drive(s) you want to add to the partition from the table.
Only EDLM scanning drives appear in the list.
7 Click Next.
The Create Partition - EDLM Policy Settings screen appears (see
Figure 34 on page 221).
8 If desired, set EDLM scanning policies on this EDLM library
managed partition (go to
Scanning Policies on Partitions
9 If you do not wish to configure automatic EDLM scanning policies on
the partition, click Apply to finish.
Step 5: Setting Up Automatic EDLM Scanning Policies on Partitions
You can set EDLM scanning policies on both standard partitions and on
EDLM library managed partitions. Once configured, scanning takes place
automatically per the policies. You can temporarily stop automatic scans
on partitions by using the Pause feature (see
Partitions on page 226).
1 Log on as an administrator.
2 From the Web client, select Setup > Partitions.
3 Click Create to create a new partition, or select a partition and click
Modify to modify an existing partition.
4 When finished configuring the general settings, click Next.
The Create Partition - EDLM Policy Settings screen appears (see
Figure 34 and Figure
Note: Fewer policies are available on EDLM library managed
partitions because they are inaccessible to hosts.
Chapter 8 Extended Data Lifecycle Management
Step 5: Setting Up Automatic EDLM
on page 220).
Pausing EDLM Scans on
35).
Incomplete EDLM Scans
220
8