Troubleshooting "Library Not Ready" Messages - Quantum scalar i500 User Manual

Troubleshooting "Library Not Ready" Messages

Scalar i500 User's Guide
Note: If your library is running firmware version 600G or later, you
can only restore a saved configuration that was created with
firmware version 410G or later. If you need to restore a
configuration created with firmware that is earlier than 410G,
contact Quantum Support for assistance.
The Configuration operation is available only on the Web client. The path
to open the appropriate screen is:
• From the Web client, select
The operator panel and Web client each include a header that contains
the company logo, product name, and the three main navigation buttons
, , and
Home Help Logout
when the library is not ready. (No message displays in the header when
the library is in a ready state.)
On the operator panel,
whenever the library robotics are not yet ready to perform library
functions. To view more information about the library's condition, select
Tools > About Library
display , followed, when applicable, by a brief explanation. For
Not ready
example, if the library door is open, the
.
door is open
The header in the Web client also alerts you when the library is not ready.
For instance, if the library door is open, the header will display the
following message:
Library's door is open
"Library Not Ready" messages appear in the header in the operator panel
and the Web client under the following circumstances:
• The robot is in the process of calibrating. When the robot has finished
calibrating, the "Library Not Ready" message no longer appears.
• The robot cannot calibrate. For example, a fiducial label is missing,
preventing the robot from calibrating.
Troubleshooting "Library Not Ready" Messages
Tools > Save/Restore Configuration
. In addition, a message in the header alerts you
LIBRARY NOT READY
. The field on the
State
State
.
Chapter 13 Troubleshooting
flashes at regular intervals
screen will
About Library
field will display:
Not ready,
.
496