Robotics Diagnostics - Quantum scalar i500 User Manual

Robotics Diagnostics

Scalar i500 User's Guide
The Robotics diagnostics currently include only one test, the Get/Put
Test.
Get/Put Test
The Get/Put Test requires the robot to remove one tape cartridge from
the top I/E station slot, and then put the tape cartridge back into the same
slot. To run this test, you must insert a tape into the library's top
(uppermost) I/E station slot.
Robotics tests cannot be performed from the operator panel. The path to
open the appropriate screen is as follows:
• From the Web client, select
.
Get/Put Test
Chapter 13 Troubleshooting
Tools > Diagnostics > Robotics > Robotics
Robotics Diagnostics
13
523