Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

Caution: Some host applications may fail import/export operations
when the I/E station contains cartridges that are assigned
to another partition. Move cartridges from the I/E station
as soon as possible to avoid possible conflicts with the
other partitions.
Note: If your library has zero I/E station slots, you cannot import or
export cleaning media. See
page 79.
Once the import operation has started, do not interfere with
Note:
the operation by opening and closing the I/E station door.
The process for importing cleaning cartridges includes the following
steps:
1 Go to the front of the library and insert the cartridges into the I/E
station.
Do not insert cartridges into the I/E station during the restart
Note:
process.
2 Close the I/E station door.
The screen appears on the operator panel if the
Assign I/E
Cartridge Assignment
screen (
Settings Tools > System Settings
If the screen appears, do the following:
Assign I/E
a On the
Assign I/E
The button turns red after it is selected. Selecting
System
assigns the cartridge to the physical library and not to a specific
partition.
Select .
b
Apply
3 Use the
Import Cleaning Media
the Web client to import the cleaning cartridges into the library.
Follow the on-screen prompts, or see the library's online Help for
Chapter 9 Running Your Library
Configuring I/E Station Slots
setting is enabled on the operator panel
).
screen, select
System
screen on either the operator panel or
About Cleaning Tape Drives
on
Manual
System
.
System
261