Saving The Configuration Record; Saving And Restoring The Library Configuration - Quantum scalar i500 User Manual

Saving the Configuration
Record

Saving and Restoring the Library Configuration

Scalar i500 User's Guide
You cannot e-mail the library configuration record from the operator
panel. The path to open the appropriate screen is as follows:
• From the Web client, select
Administrators can use the
13
the Web client to e-mail the library configuration record.
You cannot save the library configuration record from the operator panel.
The path to open the appropriate screen is as follows:
• From the Web client, select
The library has many configurable items, such as tape drive IDs,
partitions, user accounts, Import/Export (I/E) stations, and cleaning
slots. In the event of a hardware failure or firmware upgrade, the save
and restore operations can be used to restore the library's firmware and
configurable items to a previous state.
Note: You cannot restore a saved configuration after removing or
replacing a control module or expansion module. After
removing and/or replacing the module, save the library
configuration for future use.
The Saving and Restoring operations should not be performed
Note:
concurrently by multiple administrators logged in from
different locations. You can access the screens, but you cannot
apply changes while another administrator is performing the
same operation.
Chapter 13 Troubleshooting
Saving and Restoring the Library Configuration
Tools > E-mail Configuration Record
Tools - Save Configuration Record
Tools > Save Configuration Record
.
screen on
.
494