Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

• — Click the
Service Keytab
file. The service keytab file is a file you generate on your
Kerberos/Active Directory server. See
file on page 105.
You can view, enable, and configure Kerberos settings from the Web
client. You cannot use the operator panel to configure Kerberos settings.
The path to open the appropriate screen is as follows:
• From the Web client, select
.
Authentication
Generating the Service Keytab file
These instructions are for generating the service keytab file for use with
Microsoft® Active Directory®. If you not using Active Directory, refer to
your Kerberos vendor for instructions on generating this file.
1 Set up an Active Directory domain on the Windows server.
2 If Active Directory is not already configured, run
3
Windows 2003 servers only:
Windows 2003 server as follows:
aGo to www.microsoft.com
support tools sp2" or click on the following link:
http://www.microsoft.com/downloads/details.aspx?FamilyID
=96a35011-fd83-419d-939b-9a772ea2df90&DisplayLang=en
b Download both
c Run
suptools.msi
4 Create a computer account in Active Directory.
• Do not select any of the check boxes during creation.
• The account name will be used for <computer account> fields
shown in the following steps.
5 At the command prompt, map SPN to the computer account. Use the
following format:
setspn -A library/<fqdn of library> <computer account>
For example:
setspn -A library/delos.dvt.mycompany.com kerbtest
Chapter 3 Configuring Your Library
button to select the service keytab
Browse
Generating the Service Keytab
Setup > User Management > Remote
Install Windows Support Tools on the
and search for "windows server 2003
and
support.cab suptools.msi
to begin installation.
Working With User Accounts
.
dcpromo
.
3
105