E-Mailing The Configuration Record - Quantum scalar i500 User Manual

E-mailing the
Configuration Record
Scalar i500 User's Guide
• Fibre Channel (FC) tape drives—partition name, number of tape
drives in partition, drive location, SCSI element address, online
status, active status, ready state, vendor, model, serial number,
tape drive firmware version, drive type, logical serial number,
interface type, World Wide Node Name (WWNN) loop ID,
topology, speed, and actual speed.
Note:
• Serial Attached SCSI (SAS) tape drives—partition name, number
of tape drives in partition, drive location, SCSI element address,
interface type, drive type, ready state, online status, barcode,
media type, element address, vendor, model, physical serial
number, logical serial number, SCSI ID, firmware level, control
path status.
• I/O blade information—blade number, blade ID, location
coordinates, serial number, WWNN, firmware version, and
control LUN.
• Partition information—number of partitions, number of cleaning
slots, number of unassigned slots, number of import/export
(I/E) slots, I/E manual assignment setting, partition name,
number of slots, number of tape drives, and number of
cartridges.
Administrators can use the
13
the Web client to e-mail the library configuration record.
Do not enter more than one e-mail address in the
on the
Tools - E-mail Configuration Record
configuration record to multiple e-mail addresses, repeat the procedure
for each e-mail address.
Before you can e-mail the configuration record, the library e-mail account
must be configured. For information on setting up the e-mail account, see
Configuring the Library E-mail Account
Saving and E-mailing the Library Configuration Record
If the FC tape drive is attached to an FC I/O blade, the
WWNN indicates the WWNN of the I/O blade, not
the tape drive.
Tools - E-mail Configuration Record
Chapter 13 Troubleshooting
E-mail Address
screen. If you need to send the
on page 92.
screen on
text box
493