Table 11 Ethernet Expansion Blade Status Led Descriptions - Quantum scalar i500 User Manual

Table 11 Ethernet Expansion
Blade Status LED Descriptions
LED Color Represents
Green Processor
status
Amber Health status
Blue Power
control
status
Table 2 Explanation of Ethernet Expansion blade Ethernet Port LED States
LED Color Blade Status
Green • Solid ON — Link is up; data can be sent or received through the Ethernet port.
• Solid OFF — Link is down; data cannot be sent or received through the Ethernet
port.
Amber • Flashes at irregular intervals — Data activity is occurring through the Ethernet port.
• Solid OFF — No data activity is occurring through the Ethernet port.
Scalar i500 User's Guide
Tape Drive Ethernet Connectivity and the Ethernet Expansion Blade
Blade Status
• Solid OFF — Blade's main processor is not operating (or blade is
booting).
• Solid ON — Blade's main processor is not operating.
• Blinks once per second (1 Hz) — Normal.
• Solid OFF — Normal.
• Solid ON — Failure or blade is autoleveling.
In conjunction with the blue LED blinking once very 10 seconds,
this is a normal condition. Autoleveling takes about three minutes
per blade, and blades autolevel in series. Never remove a blade
when the amber LED is solid ON unless it has been on continuously
for at least 10 minutes.
• Solid OFF — Blade is not receiving power.
• Solid ON — Blade is not operational.
• Blinks once every second (1 Hz) — Powered off. Ready to remove.
• Blinks once per 10 seconds (flash) — Normal. Blade is powered on.
Chapter 12 Installing, Removing, and Replacing
483