Preparing To Use The 9U Expansion Module - Quantum scalar i500 User Manual

Preparing to Use the 9U
Expansion Module
Scalar i500 User's Guide
1 Close the library's I/E station and access doors.
12
2 Add the tape drives to the modules. For details, see
Removing, and Replacing Tape Drives
3 Add the power supplies. For details, see
Replacing Power Supplies
Chapter 12 Installing, Removing, and Replacing
Replacing an Expansion Module
1 Parking tab in "unparked" position
on page 444.
Adding, Removing, and
on page 420.
Adding,
406