Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

Permanently Removing Expansion Modules From an Existing Library
2 Add the tape drives to the modules. For details, see
Removing, and Replacing Tape Drives
3 Add the power supplies. For details, see
Replacing Power Supplies
4 If your library contains FC I/O blades, install both the I/O blades
and the accompanying fan blades in the expansion module. For
details, see Adding, Removing, and Replacing FC I/O Blades
page 449 and Adding, Removing, and Replacing the FC I/O Fan
Blade on page 460.
5 Unpark the robot assembly.
a Gently raise the robot assembly so that it no longer rests on the
parking tab.
Chapter 12 Installing, Removing, and Replacing
1 Y-rail in unlocked, functional
position
on page 444.
Adding, Removing, and
on page 420.
Adding,
on
379