Library Power Consumption And Heat Output - Quantum scalar i500 User Manual

Library Power Consumption and Heat Output

Library Configuration
Subassembly Power Consumption:
Scalar I500 Library with Robot and LCB (no tape drives installed;
robot moving; LCB installed)
UDS3 IBM LTO-2 Drive Sled Module (SCSI)
UDS3 IBM LTO-2 Drive Sled Module (Fibre Channel)
UDS3 IBM LTO-3 Drive Sled Module (SCSI)
UDS3 IBM LTO-3 Drive Sled Module (Fibre Channel)
UDS3 IBM LTO-4 Drive Sled Module (SCSI)
UDS3 IBM LTO-4 Drive Sled Module (Fibre Channel)
Scalar i500 User's Guide
Component
9U Chassis (empty)
5U Packaging Kit
9U Packaging Kit
14U Packaging Kit
The typical library power consumption (Watts/hour) and heat output
(BTU/hour) is listed below.
"Typical" values for tape drives assumes tape drives are
Note:
writing.
Library Power Consumption and Heat Output
Weight
65 lbs (29.5 kg)
20 lbs (9 kg)
24 lbs (10.9 kg)
40 lbs (18 kg)
Typical Power
Consumption
(kW/Hour)
0.079
0.029
0.032
0.027
0.029
0.038
0.040
Typical Heat
Output
(BTU/Hour)
269.0
99.0
109.2
92.1
99.0
129.7
136.5
535