Upgrading Tape Drive Firmware - Quantum scalar i500 User Manual

Upgrading Tape Drive Firmware

Scalar i500 User's Guide
Note: If your library is running firmware version 600G or later, you
can only downgrade library firmware to version 410G or later.
If you need to downgrade to a version earlier than 410G,
contact Quantum Support for assistance.
Note: If you purchased your library after October 15, 2008, you
cannot downgrade library firmware to below version 520G.
Note: This operation should not be performed concurrently by
multiple administrators. You can access the screen, but you
cannot apply changes while another administrator is
performing the same operation.
Note: The library automatically restarts after the firmware upgrade
is complete. Before logging into the library, clear the Web
browser cache. See your Web browser's documentation for
instructions on how to clear the cache.
You can find instructions on updating library firmware on the Quantum
Website. You can also find step-by-step instructions in your library's
online Help. To access the online Help system, click the
top right of the Web client or operator panel user interface.
You cannot upgrade library firmware from the operator panel. The path
to open the appropriate screen is as follows:
• From the Web client, select
You can use the Web client to upgrade one or more tape drives in your
library with an image file obtained from Quantum Support.
Chapter 11 Updating Library and Tape Drive Firmware
Upgrading Tape Drive Firmware
Tools > Update Library Firmware
icon at the
Help
.
285