Scalar i500 User's Guide
Caution:
Forcing the blade into the bay can cause the pins to
bend.
4 Evenly apply pressure to both sides of the fan blade and slide it into
the expansion module until the latch hooks begin to move towards
the middle of the blade. Push the latch hooks towards the middle of
the blade and into the locked position. You will feel the blade pins
connect with the expansion module's backplane as the blade locks
into place.
Chapter 12 Installing, Removing, and Replacing
Adding, Removing, and Replacing the FC I/O Fan Blade
1
Fan blade
2
LED
3
Latch hooks, open
462