Figure 32 Testing The Stornext Settings - Quantum scalar i500 User Manual

Figure 32 Testing the StorNext
Settings
Scalar i500 User's Guide
Note: The default StorNext Storage Manager port number is
61776. If you changed the port on your server, be sure to
type the new port number into this field.
9 Click Apply.
The settings are configured. When complete, a Success message
appears.
10 Click Close to close the Success message.
The main screen appears again with the server you just entered listed.
There is a Run button in the Diagnostics column.
11 Click the Run button to test the settings you configured. If a Failed
message appears, you can click the Failed link and a message box
appears to help you troubleshoot. Make sure the IP addresses and
port numbers you entered are correct, and that the plug-in is
supported.
Chapter 8 Extended Data Lifecycle Management
Failed message/link
Troubleshooting text box
Incomplete EDLM Scans
217