Cabling Libraries With
SCSI Tape Drives
Scalar i500 User's Guide
Use this procedure, along with
12
installing a library that includes SCSI tape drives:
Warning:
Chapter 12 Installing, Removing, and Replacing
Figure 40
All libraries taller than 14U must be installed in a rack
having a main protective earthing (grounding) terminal,
and power must be supplied via an industrial plug and
socket-outlet and/or an appliance coupler complying with
IEC 60309 (or an equivalent national standard) and having
a protective earth (ground) conductor with a cross
sectional area of at least 1.5 mm
To ensure proper airflow and access space, Allow 60 cm
(24 inches) in the front and back of the library.
Cabling the Library
and
Figure
41, if you are
2
(14 AWG).
297