Figure 31 Stornext Host Configuration - Quantum scalar i500 User Manual

Figure 31 StorNext Host
Configuration
Scalar i500 User's Guide
3 In the Name field, type a name that you will use to identify the
StorNext Storage Manager server.
4 From the API Client Plug-in drop-down list, select the SNAPI client
plug-in.
5 From the Primary Host Address field, type the IP address (or host
name, if DNS is configured) of the primary StorNext Storage
Manager server.
6 From the Primary Host Port field, accept the default or type the port
number of the primary StorNext Storage Manager server.
Note: The default StorNext Storage Manager port number is
61776. If you changed the port on your server, be sure to
type the new port number into this field.
7 Optionally, type an IP address (or host name, if DNS is configured)
for a secondary StorNext Storage Manager server in the Secondary
Host Address field.
8 Optionally, accept the default or type a port number of a secondary
StorNext Storage Manager server in the Secondary Host Port field.
Chapter 8 Extended Data Lifecycle Management
Incomplete EDLM Scans
216