Scalar I500 User's Guide - Quantum scalar i500 User Manual

Scalar i500 User's Guide

After creating, modifying, or deleting an FC host connection, save the
library configuration. For instructions on how to save the library
configuration, see Saving and Restoring the Library Configuration
page 494.
Note: These operations should not be performed concurrently by
multiple administrators logged in from different locations.
You can access the appropriate screens, but you cannot apply
changes while another administrator is performing the same
operation.
Creating an FC Host Connection
For each FC host connection you want to create, you can set the following
parameters:
• — The host device name.
Host Name
• — The host port number.
Host Port
• — The World Wide Port Name of the host device. The
WWPN
text box is limited to 17 lowercase alphanumeric characters and
colons (:). The WWPN must be typed in the following format:
12345678:0b33ef12.
• — The appropriate host operating system.
Type
• — Lists the I/O blades you can select for the host.
I/O blades
Modifying an FC Host Connection
For each FC host connection you want to modify, you can set the
following parameters:
• — The host device name.
Host Name
• — The host port number.
Host Port
• — The appropriate host operating system.
Type
You cannot modify the WWPN. If you want to change the WWPN, you
must delete and re-create the FC host connection.
Chapter 3 Configuring Your Library
Working With FC I/O Blades
on
3
WWPN
3
115