Preparing To Use The Library - Quantum scalar i500 User Manual

Preparing to Use the
Library
Scalar i500 User's Guide
9 Repeat these steps for each module you need to re-install in the
library configuration.
Prepare to use the library as follows:
12
1 Add the tape drives to the modules. For details, see
Removing, and Replacing Tape Drives
2 Add the power supplies. For details, see
Replacing Power Supplies
3 Add the LCB to the control module. For details, see
Replacing the Library Control Blade and LCB Compact Flash Card
page 408.
Chapter 12 Installing, Removing, and Replacing
Adding Expansion Modules to an Existing Library
1 Y-rail in unlocked, functional
position
on page 444.
Adding, Removing, and
on page 420.
Adding,
Removing and
on
359