Diagnostic Information; Start; Symptom Tables; Service Errors (1Xx.xx's/9Xx.xx's) - Lexmark C520 Series Service Manual

2. Diagnostic information

Start

CAUTION: Remove the power cord from the printer or wall outlet before you connect or
disconnect any cable or electronic card or assembly for personal safety and to prevent damage to
the printer. Use the handholds on the side of the printer. Make sure your fingers are not under the
printer when you lift or set the printer down.
Use the service error code, user status message, user error message, symptom table, service checks, and
diagnostic aids in this chapter to determine the corrective action necessary to repair a malfunctioning printer.
They will lead you to solutions or service checks, including use of various tests.

Symptom tables

If your printer completes the
have a symptom, go to

Service errors (1xx.xx's/9xx.xx's)

If a service error code appears while you are working on the printer, go to
and take the indicated action for that error.
Service error codes are indicated by a three-digit error code followed by a period and additional numbers in the
format XXX.YY. In most cases, five digits are shown.

User status and attendance messages

•
User status messages provide the user with information on the current status of the printer. Ready
displays on the first line of the display unless invoked, and then Power Saver displays.
•
User attendance messages are indicated by a two- or three-digit error code that provides the user with
information that explains a problem with a print cartridge, paper jam, option, port, and so on. If a user error
message displays, go to Go to
messages—paper jams and paper handling errors (2xx.xx)" on page
"Power-on self test (POST) sequence" on page 2-4
"Symptom tables" on page
"User attendance messages" on page 2-10
2-5. Locate your symptom, and take the appropriate action.
"Service error codes" on page
5022-xxx
without an error, and you
and Go to "User attendance
2-18.
Diagnostic information
2-6,
2-1